This high-performance Nylon stock sheet is engineered for demanding hydraulic system components. Its robust material properties ensure exceptional durability and reliability under extreme operational pressures.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.628" |
| Length | 39" |
| Width | 31" |
Built to exacting engineering tolerances, this 0.628-inch thick Nylon stock sheet offers superior wear resistance, excellent tensile strength, and low friction coefficients, making it ideal for fabricating critical hydraulic components. The dimensions of 39 inches by 31 inches provide ample material for a wide range of custom parts, including seals, bearings, and wear pads, designed to withstand high pressures and resist chemical degradation common in hydraulic fluid environments. Its inherent toughness contributes to extended service life and reduced maintenance cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine to final component specifications, ensuring precise tolerances. 3. Install fabricated components into the hydraulic system according to OEM specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon for high-pressure hydraulic applications. | Always specify hydraulic-grade Nylon for components subjected to significant pressure and wear. |
| Improper machining leading to dimensional inaccuracies. | Utilize precision machining techniques and verify all dimensions against engineering drawings. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Plates and Bushings, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||