This robust Nylon stock sheet is engineered for critical hydraulic system components. Its superior strength and wear resistance ensure reliable performance in demanding environments, offering a cost-effective and durable solution.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.623" |
| Length | 21" |
| Width | 27" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers exceptional mechanical strength and abrasion resistance essential for hydraulic components. With dimensions of 0.623 inches thick, 21 inches wide, and 27 inches long, it provides ample material for fabrication. Nylon's inherent self-lubricating properties reduce friction and wear in dynamic applications, while its excellent chemical resistance safeguards against hydraulic fluids and common industrial contaminants. This material is ideal for fabricating custom seals, wear pads, bushings, and guide elements within hydraulic cylinders and power units, ensuring prolonged operational life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Machine finished edges and critical mating surfaces to ensure proper fit and sealing. 3. Install fabricated components into the hydraulic system, verifying alignment and absence of stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or poor edge quality. | Employ sharp, carbide-tipped cutting tools specifically designed for machining Nylon, ensuring adequate cooling. |
| Over-tightening fasteners, causing excessive stress concentration and potential cracking. | Use appropriate torque specifications and consider the use of washers to distribute load when securing Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Components, Wear Rings and Bushings, Sealing Elements, Guide Shoes, Custom Hydraulic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||