This robust Nylon stock sheet offers exceptional strength and wear resistance for critical plumbing and janitorial applications. Its dense polymer structure ensures longevity and reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.623" |
| Length | 20" |
| Width | 23" |
Manufactured under strict quality controls, this 0.623-inch thick Nylon stock sheet provides a robust material solution. The material's inherent properties include high tensile strength, excellent abrasion resistance, and superior chemical inertness, making it ideal for components subjected to continuous stress and corrosive substances. Its precise dimensions of 20 inches in length and 23 inches in width allow for efficient fabrication of custom parts and fixtures. Typical applications leverage Nylon's thermal stability and low coefficient of friction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Prepare mating surfaces for bonding or fastening, ensuring cleanliness and proper surface treatment if required. 3. Install the fabricated Nylon component according to the specific design specifications and operational context.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentration and potential material cracking. | Use torque-limiting tools and follow recommended tightening procedures for Nylon components. |
| Using incompatible adhesives or solvents that can degrade Nylon's structural integrity. | Consult material compatibility charts and use only approved adhesives and cleaning agents for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pump impellers and wear plates, Durable valve seats and seals, Corrosion-resistant pipe supports and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||