High-performance Nylon stock sheet engineered for robust pressure and temperature control applications. Offers superior mechanical strength, abrasion resistance, and dimensional stability under demanding conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.620" |
| Length | 36" |
| Width | 24" |
Engineered for reliability and performance, this 0.620-inch thick Nylon stock sheet boasts dimensions of 36 inches by 24 inches. Exhibiting excellent tensile strength, high impact resistance, and a broad operating temperature range, it is ideal for applications requiring durability and resilience. Its inherent lubricity and resistance to chemicals make it suitable for dynamic components in pressure and temperature regulation systems, ensuring consistent performance and extended service life in challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut to required dimensions using appropriate tooling. 3. Install securely into the intended pressure or temperature control system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or imprecise edges. | Utilize sharp, industrial-grade cutting blades specifically designed for plastics like Nylon. |
| Over-tightening fasteners during installation, causing stress concentrations and potential cracking. | Apply appropriate torque settings and consider using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure regulator components, Temperature control valve seals, High-pressure fluid system seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||