This robust Nylon stock sheet, engineered for demanding hydraulic systems, provides exceptional wear resistance and a low coefficient of friction. Its substantial 0.617-inch thickness ensures durability and load-bearing capacity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 34" |
| Width | 40" |
A high-performance industrial component, this Nylon stock sheet is manufactured to precise tolerances, offering a thickness of 0.617 inches, a length of 34 inches, and a width of 40 inches. Its inherent material properties, including excellent tensile strength, superior abrasion resistance, and a low coefficient of friction, make it an ideal choice for hydraulic seals, wear pads, and guide components. This material exhibits good chemical resistance to many oils and solvents commonly found in hydraulic fluid systems, ensuring long-term operational integrity under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the Nylon sheet will be applied is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the cut Nylon component to its intended location using industry-standard fastening methods suitable for hydraulic environments.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting resulting in sharp edges that can damage mating components. | Utilize a sharp, high-quality cutting tool and deburr all edges thoroughly after cutting. |
| Failure to account for thermal expansion and contraction in the design. | Incorporate appropriate clearance or expansion joints in the design to accommodate potential dimensional changes due to temperature fluctuations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear pads and guides, Sealing elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||