This robust Nylon stock sheet, measuring 0.602" thick, 45" long, and 13" wide, offers superior performance in pressure and temperature control systems. Its inherent strength and wear resistance make it ideal for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.602" |
| Length | 45" |
| Width | 13" |
Manufactured under strict quality controls, this 0.602" thick Nylon stock sheet provides exceptional mechanical strength and excellent thermal insulation properties suitable for pressure and temperature control applications. Its high tensile strength, abrasion resistance, and chemical inertness allow it to withstand significant loads and environmental stresses. Ideal for fabricating custom components, seals, gaskets, and structural elements that require reliable performance under varying operational conditions. Dimensions: 0.602" (Thickness) x 45" (Length) x 13" (Width).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the Nylon stock sheet to the required dimensions for the specific application. 2. Prepare the mating surfaces for proper adhesion or mechanical fastening, ensuring they are clean and free of contaminants. 3. Install the fabricated Nylon component, ensuring a secure and leak-free fit according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or imprecise cuts. | Employ sharp, specialized cutting tools for plastics, such as carbide-tipped blades, and maintain appropriate feed rates and speeds to prevent heat buildup and ensure clean edges. |
| Over-tightening mechanical fasteners, causing stress concentrations and potential cracking of the Nylon material. | Utilize torque-limiting tools and apply fasteners incrementally to achieve uniform stress distribution. Consider using washers to increase the bearing surface area and reduce localized pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket Fabrication, Wear Strips and Bushings, Insulating Components in High-Temperature Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||