This robust Nylon stock sheet is engineered for demanding hydraulic applications. Its substantial thickness and dimensions provide excellent material for custom component fabrication, ensuring reliable system performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.592" |
| Length | 38" |
| Width | 35" |
Specified by design engineers worldwide, this high-density Nylon stock sheet (0.592" thickness, 38" length, 35" width) offers exceptional mechanical strength and low friction. Its inherent toughness, excellent wear resistance, and good chemical stability make it ideal for fabricating seals, bearings, wear pads, and specialized hydraulic manifold components. The material's low moisture absorption contributes to consistent dimensional stability in varied operating environments, critical for maintaining seal integrity and precise fluid control.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against application requirements. 2. Precisely machine the Nylon stock sheet to the required component geometry using appropriate cutting and shaping tools. 3. Thoroughly clean all machined surfaces to remove any debris or contaminants before integration into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessively high speeds, leading to excessive heat and potential material degradation. | Utilize moderate machining speeds and ample coolant to manage heat buildup and preserve the Nylon's structural integrity. |
| Failing to account for Nylon's slight expansion/contraction due to temperature and moisture fluctuations in the design. | Incorporate appropriate tolerances in the design to accommodate potential dimensional changes in the Nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wear rings, Bearing cages and bushings, Manifold block components, Fluid transfer system parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||