This robust Nylon stock sheet is engineered for extreme hydraulic environments. Its exceptional durability and dimensional stability ensure reliable performance under high pressure and stress.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.589" |
| Length | 28" |
| Width | 41" |
Purpose-built for heavy-duty applications, this Nylon stock sheet (0.589" thickness, 28" width, 41" length) excels in hydraulic systems requiring superior material integrity. Nylon's inherent properties of excellent wear resistance, high impact strength, and good chemical compatibility make it ideal for components subjected to constant abrasion and pressure fluctuations. Its low coefficient of friction minimizes energy loss, while its excellent machinability allows for precise component fabrication. This material is a prime choice for wear pads, seals, backup rings, and other critical hydraulic parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate machining tools. 3. Smooth all edges to prevent stress concentration and ensure a proper fit within the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic instead of engineering-grade Nylon for high-pressure hydraulics. | Always specify engineering-grade Nylon (like this stock sheet) for hydraulic components to guarantee necessary strength and durability. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and chamfer all cut edges to prevent premature wear or seal damage in operation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Wear Pads, Seals and Gaskets, Backup Rings for O-rings, Bushings and Bearings in Hydraulic Cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||