This robust Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction, making it a superior choice for demanding hydraulic systems. Its dimensional stability ensures reliable performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.581" |
| Length | 32" |
| Width | 37" |
Designed for demanding industrial environments, this Nylon stock sheet measures 0.581 inches in thickness, 32 inches in width, and 37 inches in length. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and superior abrasion properties crucial for hydraulic components. Its inherent lubricity reduces wear and extends the service life of mating parts, while its resistance to a wide range of chemicals and oils ensures integrity in aggressive fluid environments. This material is ideal for fabricating seals, bearings, wear pads, and other critical components within hydraulic power units and systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and inspect for any surface defects. 2. Accurately machine the Nylon stock sheet to the required component specifications using appropriate cutting and shaping tools. 3. Deburr all edges and ensure a smooth finish for optimal performance and to prevent damage to mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ carbide-tipped or HSS tooling specifically designed for machining Nylon, using appropriate speeds and feeds to prevent heat buildup. |
| Over-tightening fasteners when mounting components made from Nylon, causing stress cracking. | Use appropriate torque specifications and consider using washers to distribute load, avoiding excessive clamping forces. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Seal glands and backup rings, Bearing surfaces in pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||