This high-grade Nylon stock sheet, specifically engineered for hydraulic applications, offers exceptional wear resistance, low friction, and superior impact strength. Its robust material properties ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.577" |
| Length | 39" |
| Width | 17" |
Trusted by engineers across multiple sectors, this Nylon stock sheet (0.577" thickness, 39" length, 17" width) is a premier choice for demanding hydraulic systems. Composed of high-density Nylon 6, it exhibits excellent abrasion resistance, chemical inertness to many hydraulic fluids, and a low coefficient of friction, minimizing wear on mating components. Its inherent toughness and impact resistance make it ideal for fabricating seals, wear rings, guide bushings, and specialized hydraulic components subjected to high pressures and continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the Nylon sheet to the required dimensions for the specific component. 2. Machine the component using standard machining practices for Nylon, ensuring proper cooling to prevent thermal degradation. 3. Deburr all edges and surfaces to remove any sharp points that could compromise performance or cause premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessive speeds without adequate cooling, leading to material softening and dimensional instability. | Utilize sharp tooling and maintain moderate cutting speeds with consistent coolant application to manage heat buildup. |
| Over-tightening fasteners or press-fitting components, causing stress concentrations and potential cracking in the Nylon. | Design for appropriate clearance and use torque-limiting tools when fastening to avoid exceeding the material's yield strength. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Rings and Guide Bushings, Hydraulic Valve Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||