This premium Nylon Stock Sheet, measuring 0.576" thick, 23" wide, and 46" long, is engineered for demanding pressure and temperature control applications. Its robust material properties ensure reliability and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 23" |
| Width | 46" |
Specified by design engineers worldwide, this 0.576" thick Nylon Stock Sheet (23" x 46") offers exceptional mechanical strength, abrasion resistance, and a broad operating temperature range. Its inherent lubricity and chemical inertness make it suitable for seals, gaskets, and wear components in systems managing moderate to high pressures and varying temperatures. The material's low coefficient of friction minimizes wear and tear, extending the service life of mating parts. Manufactured to precise tolerances, it ensures consistent performance and reliable sealing capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Install the cut component securely, ensuring proper fitment and engagement with the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for nylon, leading to chipping or melting. | Employ sharp, carbide-tipped blades or band saw blades specifically designed for cutting plastics, using a slow feed rate and adequate lubrication if necessary. |
| Over-tightening fasteners or clamps, which can cause the nylon to deform or crack. | Apply torque specifications cautiously, utilizing washers if needed to distribute load and avoid localized stress points. Allow for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure seals and gaskets, Wear strips and guide components, Temperature-resistant valve seats.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||