This robust Nylon stock sheet provides exceptional wear resistance and toughness, making it ideal for constructing durable hydraulic components. Engineered for longevity and reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 18" |
| Width | 40" |
A proven choice for industrial professionals, this Nylon stock sheet offers superior mechanical strength and excellent abrasion resistance, crucial for hydraulic system integrity. With dimensions of 0.548 inches thick, 18 inches in length, and 40 inches in width, it provides ample material for custom fabrication of seals, wear pads, and structural components. Its inherent toughness, chemical resistance, and low coefficient of friction ensure prolonged service life under high pressure and dynamic loads, minimizing maintenance and downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine finished edges and surfaces to ensure tight tolerances and proper sealing. 3. Install components securely, adhering to hydraulic system design specifications and pressure ratings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly dimensioned cuts leading to leaks or premature failure. | Utilize precision cutting equipment and verify all measurements against design specifications before fabrication. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Follow recommended torque specifications for all fasteners to prevent material deformation and damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and glands, Wear strips and guide bushings, Manifold blocks and spacers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||