This industrial-grade Nylon stock sheet offers exceptional strength and wear resistance for demanding heating and cooling applications. Its robust material properties ensure longevity and reliable performance in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 39" |
| Width | 33" |
Trusted by engineers across multiple sectors, this Nylon stock sheet provides a superior solution for thermal management and fluid conveyance. Measuring 0.548 inches in thickness, with dimensions of 39 inches in length and 33 inches in width, it exhibits excellent abrasion resistance, low friction, and good chemical inertness. These properties make it ideal for fabricating components in HVAC systems, heat exchangers, and fluid handling equipment where durability and efficient operation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Smooth all cut edges to prevent stress concentrations and ensure a clean finish. 3. Securely fasten the fabricated Nylon components into the heating or cooling system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics, leading to poor edge quality. | Employ carbide-tipped blades or specialized plastic cutting saws for clean, precise cuts. |
| Failing to deburr or chamfer edges after cutting, creating potential failure points. | Always deburr and chamfer cut edges to remove sharp corners and improve stress distribution. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Ductwork Components, Heat Exchanger Bushings, Fluid Transfer Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||