This heavy-duty Nylon Stock Sheet offers exceptional strength and chemical resistance, making it the premier choice for fabricating custom components in harsh plumbing and janitorial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.533" |
| Length | 36" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.533-inch thick Nylon stock sheet provides a robust and dimensionally stable material solution. Composed of high-grade nylon, it exhibits excellent tensile strength, impact resistance, and a high degree of chemical inertness to common cleaning agents and wastewater components. Its generous dimensions of 36 inches by 43 inches allow for efficient cutting and fabrication of larger parts, reducing waste and assembly time in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mating surfaces according to the specific application's design. 3. Securely fasten the fabricated nylon component using approved industrial fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers. | Employ carbide-tipped blades or specialized router bits designed for cutting nylon to ensure clean, precise edges and prevent material delamination. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Utilize torque-limiting tools and appropriate washers to distribute load evenly, preventing premature failure of the nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom manifold fabrication, Protective wear plates for corrosive environments, Durable seals and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||