This premium Nylon stock sheet, engineered for hydraulic applications, delivers exceptional toughness and wear resistance. Its robust properties ensure reliability in demanding fluid power environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.525" |
| Length | 17" |
| Width | 23" |
Specified by design engineers worldwide, this Nylon stock sheet (0.525" thickness, 17" length, 23" width) offers superior mechanical strength and abrasion resistance, crucial for hydraulic component fabrication. Its inherent lubricity minimizes friction in dynamic sealing applications, while its excellent chemical resistance protects against common hydraulic fluids and industrial solvents. Ideal for fabricating custom seals, wear pads, and structural elements within hydraulic systems operating under moderate pressure and temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove debris and contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Install the fabricated component, ensuring proper fitment and sealing within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or rough edges. | Employ sharp, dedicated cutting tools designed for plastics, such as a fine-tooth saw or a precision router bit, to achieve clean cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking of the Nylon. | Utilize appropriate torque specifications for Nylon components. Consider using washers to distribute load and avoid direct contact with sharp edges. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Hydraulic Seals, Wear Strips and Bushings, Hydraulic Manifold Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||