This robust Nylon stock sheet offers superior wear resistance and impact strength, engineered for custom fabrication of critical components in demanding industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.510" |
| Length | 13" |
| Width | 44" |
Designed for demanding industrial environments, this 0.510-inch thick Nylon stock sheet provides exceptional mechanical properties. Its high tensile strength, excellent abrasion resistance, and low coefficient of friction make it ideal for fabricating wear pads, gears, bushings, and other high-stress components. The material's inherent toughness and dimensional stability ensure reliable performance under continuous load and extreme conditions. Dimensions: 0.510" (Thickness) x 13" (Length) x 44" (Width).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet using a suitable marking tool. 2. Cut the sheet to size using appropriate industrial cutting tools such as a band saw, jig saw, or CNC router. 3. Smooth all cut edges to remove burrs and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools that can cause melting or chipping of the nylon. | Employ sharp, high-speed cutting tools with appropriate feeds and speeds to prevent heat buildup and ensure clean cuts. |
| Overheating the material during fabrication, leading to degradation of properties. | Utilize cooling methods such as air jets or coolant during cutting and machining operations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Pads and Strips, Custom Gears and Sprockets, Bushings and Bearings, Chute Liners, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||