Engineered for robust hydraulic systems, this 0.472" thick Nylon stock sheet provides exceptional durability and reliable performance under extreme conditions. Its superior material properties ensure long service life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.472" |
| Length | 43" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 0.472" thick Nylon stock sheet offers a nominal size of 43" x 23". Exhibiting excellent tensile strength, high impact resistance, and low friction coefficient, it is ideal for components subjected to wear and abrasion. Its inherent chemical resistance to hydraulic fluids, oils, and greases, coupled with its good electrical insulation properties, makes it a versatile choice for demanding industrial applications where reliability is paramount. The material's ability to absorb shock and vibration further enhances its suitability for critical hydraulic system parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free from debris. 2. Position the nylon sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, considering thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Thoroughly clean mating surfaces to remove all contaminants, ensuring optimal adhesion or seating. |
| Over-tightening fasteners, leading to material deformation. | Use torque wrenches and follow recommended torque values to prevent excessive stress on the nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components (e.g., wear bands, seals), Pump and valve internal parts, Bearing and bushing materials in fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||