This robust Nylon stock sheet offers superior mechanical properties, including high tensile strength and excellent abrasion resistance. Its dense, resilient nature makes it ideal for demanding industrial components and fabrication projects.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 18" |
| Width | 35" |
Specified by design engineers worldwide, this 0.469-inch thick Nylon stock sheet, measuring 18 inches by 35 inches, is manufactured to exacting standards for consistent performance. Its inherent toughness, excellent dielectric properties, and resistance to chemicals and moisture make it a preferred material for a wide array of industrial applications, from wear pads and bushings to electrical insulation and structural components requiring high impact strength and low friction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free of debris. 2. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using fasteners suitable for Nylon, ensuring even distribution of load to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools for cutting | Utilize carbide-tipped blades or specialized plastic cutting tools designed for consistent, clean cuts without chipping or excessive heat buildup. |
| Over-tightening fasteners, causing stress cracks | Employ washers and avoid overtightening screws or bolts. Consider slotted holes for expansion and contraction if significant temperature variations are expected. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Bushings and bearings, Electrical insulators, Gaskets and seals, Structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||