This high-performance Nylon stock sheet is engineered for exceptional durability and load-bearing capacity. Its robust material properties make it the ideal choice for challenging industrial hardware applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.442" |
| Length | 27" |
| Width | 29" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior mechanical strength and excellent wear resistance. Measuring 0.442 inches thick, 27 inches in length, and 29 inches in width, it is manufactured from high-grade Nylon (Polyamide) known for its low coefficient of friction, good chemical resistance, and ability to withstand significant impact. This makes it suitable for components subjected to continuous stress and abrasion in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free of debris. 2. Accurately measure and cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools for plastics. 3. Secure the cut Nylon piece using suitable fasteners, ensuring even distribution of load to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, carbide-tipped saw blades specifically designed for cutting Nylon or other plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the Nylon. | Employ washers and tighten fasteners to a recommended torque specification for Nylon to distribute pressure and avoid material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Gears and Bushings, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||