This high-performance Nylon Stock Sheet offers exceptional durability and chemical resistance, making it the ideal material for demanding plumbing and janitorial tasks. Its substantial thickness ensures longevity and superior functionality in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.435" |
| Length | 24" |
| Width | 30" |
Built to exacting engineering tolerances, this 0.435-inch thick Nylon Stock Sheet measures 24 inches in length and 30 inches in width. Fabricated from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and resistance to a wide range of chemicals commonly encountered in plumbing and janitorial settings. The material's inherent lubricity reduces friction, while its toughness prevents cracking and deformation under pressure. This makes it suitable for custom fabrication of seals, gaskets, wear pads, and protective components within fluid handling systems and maintenance equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Smooth any sharp edges with a file or sanding tool to prevent material damage and ensure a clean finish. 3. Install the fabricated component according to the specific design requirements and applicable industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect cutting tool, leading to uneven edges or material stress. | Employ sharp, high-quality cutting tools specifically designed for plastic or nylon materials. Ensure the tool is properly maintained and appropriate for the cutting task. |
| Overheating the nylon during fabrication processes like cutting or heat forming, causing degradation and loss of mechanical properties. | Control cutting speeds and feed rates to minimize heat buildup. If heat forming is required, use controlled heat sources and monitor temperature closely to avoid exceeding nylon's melting point. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket Fabrication for Plumbing Fixtures, Wear Strips and Bushings for Janitorial Equipment, Protective Liners in Chemical Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||