This robust Nylon stock sheet is engineered for demanding hydraulic systems. Its superior wear resistance and low coefficient of friction ensure reliable performance and extended component life in critical fluid power applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.432" |
| Length | 32" |
| Width | 45" |
Manufactured under strict quality controls, this 0.432-inch thick Nylon stock sheet offers exceptional mechanical strength and dimensional stability. Its inherent properties include excellent abrasion resistance, good impact strength, and self-lubricating characteristics, making it ideal for seals, wear pads, and guide components within hydraulic cylinders, pumps, and valves. The 32-inch by 45-inch dimensions provide ample material for various fabrication needs, reducing waste and improving efficiency in machining processes. This material exhibits low moisture absorption, contributing to consistent performance in wet environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Machine the Nylon stock sheet to the required dimensions and tolerances using standard metalworking tools with appropriate feed rates and cooling. 2. Deburr all edges to prevent premature wear or damage to mating components. 3. Install the fabricated Nylon components into the hydraulic system, ensuring proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during machining, leading to melting or distortion of the Nylon. | Employ sharp tooling and maintain moderate cutting speeds with adequate coolant to manage heat buildup during machining. |
| Ignoring the potential for slight expansion due to moisture absorption in humid environments. | Allow for a small clearance or design features that accommodate minor dimensional changes if the component will be exposed to significant humidity variations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wipers, Pump wear plates and bushings, Valve components and guides, Accumulator components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||