This robust Nylon Stock Sheet is engineered for exceptional durability in rigorous pulling and lifting applications. Its substantial thickness and high-strength nylon material ensure reliable performance under demanding loads and challenging environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 31" |
| Width | 45" |
Engineered for reliability and performance, this Nylon Stock Sheet boasts a critical thickness of 0.423 inches, a generous length of 31 inches, and a width of 45 inches. Constructed from high-tenacity nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness, making it suitable for heavy-duty industrial use. Its inherent flexibility allows for conforming to irregular shapes, while its low coefficient of friction facilitates smooth operation in pulley systems and sliding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Position the Nylon Stock Sheet in the desired location for your pulling or lifting apparatus. 3. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet with sharp edges that could cause premature wear. | Ensure all contact points are smooth and free of burrs to prevent damage to the nylon. |
| Exceeding the recommended load capacity for the specific application. | Always consult load charts and engineering specifications to determine the safe working load limit for this material in your intended use. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Winch line protection, Heavy-duty slings and straps, Chute liners for material handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||