This premium Nylon stock sheet is engineered for robust hydraulic system components. Offering exceptional durability and wear resistance, it's the ideal material for seals, wear pads, and manifold blocks.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.407" |
| Length | 25" |
| Width | 38" |
Specified by design engineers worldwide, this Nylon stock sheet boasts a precise 0.407" thickness, a 25" length, and a 38" width, conforming to stringent dimensional tolerances for critical hydraulic applications. Composed of high-performance Nylon 6/6, it exhibits excellent tensile strength, low coefficient of friction, and superior abrasion resistance, making it suitable for high-pressure environments and dynamic sealing solutions. Its inherent chemical resistance ensures longevity against common hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free of debris before machining. 2. Precisely machine to the required component dimensions using appropriate tooling for Nylon. 3. Deburr all edges thoroughly to prevent premature wear or seal damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metalworking tools for Nylon without proper speed and feed adjustments. | Utilize carbide or high-speed steel tooling with slower speeds and higher feed rates to prevent melting and chipping of the Nylon material. |
| Over-tightening fasteners when assembling components made from Nylon. | Employ torque wrenches to tighten fasteners to the manufacturer's recommended specifications, accounting for Nylon's potential for creep under sustained load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wipers, Wear pads and guide rings, Hydraulic manifold blocks, Bushings and bearings in hydraulic pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||