This high-grade Nylon stock sheet, precisely manufactured for the HVAC sector, offers exceptional durability and resistance to common industrial chemicals and moisture. Its robust nature ensures longevity in critical heating and cooling system components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.405" |
| Length | 47" |
| Width | 37" |
Specified by design engineers worldwide, this Nylon stock sheet is engineered for optimal performance in demanding HVAC environments. Measuring 0.405 inches thick, 47 inches in length, and 37 inches in width, it provides ample material for fabrication of custom components. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and a low coefficient of friction, make it ideal for applications requiring robust mechanical performance and resistance to wear. Its inherent chemical resistance further enhances its suitability for use with various refrigerants and lubricants found in heating and cooling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw) for clean, precise cuts. 3. Securely fasten fabricated components using industry-standard methods, ensuring proper alignment and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to material stress or delamination. | Use sharp, high-quality cutting blades and ensure proper feed rates to prevent heat buildup and stress. |
| Over-tightening fasteners, causing localized stress concentrations. | Employ torque-controlled fastening methods and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC component fabrication, Ductwork lining, Sealing and gasketing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||