This premium Nylon stock sheet offers exceptional strength and wear resistance, engineered for critical pressure and temperature control applications within harsh industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 46" |
| Width | 32" |
Designed for demanding industrial environments, this Nylon stock sheet (0.402" thickness, 46" length, 32" width) provides superior mechanical properties. Its high tensile strength, excellent abrasion resistance, and good thermal stability make it suitable for a wide range of sealing, wear pad, and component applications where reliability under extreme conditions is paramount. The inherent chemical resistance of Nylon further enhances its utility in corrosive atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Accurately measure and cut the Nylon sheet to the required dimensions. 3. Securely fasten the sheet using appropriate industrial fasteners or adhesives, ensuring a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick plastics. | Utilize industrial-grade saws with carbide-tipped blades specifically designed for cutting Nylon to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to material deformation. | Employ a torque wrench and follow recommended torque specifications for Nylon to avoid stress cracking and maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Sealing Gaskets for High Pressure Systems, Component Fabrication for Temperature Control Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||