This high-performance Nylon stock sheet offers exceptional durability and impact resistance. Its robust material properties make it ideal for demanding plumbing and janitorial applications requiring long-term reliability and structural integrity.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.401" |
| Length | 17" |
| Width | 47" |
Specified by design engineers worldwide, this Nylon stock sheet conforms to stringent industrial standards for material integrity and dimensional accuracy. The 0.401-inch thickness provides superior strength and rigidity, while the generous 17-inch by 47-inch dimensions offer ample material for fabrication of custom components. Nylon's inherent properties, including excellent abrasion resistance, low friction coefficient, and chemical inertness, make it a preferred choice for components exposed to corrosive fluids, mechanical wear, and environmental stress within plumbing and janitorial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Prepare mounting surfaces by ensuring they are clean, dry, and free of contaminants. 3. Securely fasten the fabricated Nylon components using recommended industrial-grade fasteners and adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate material preparation before cutting. | Ensure the Nylon stock sheet is properly supported and stabilized to prevent flexing or chipping during the cutting process. |
| Over-tightening fasteners, leading to stress concentration. | Use torque-limiting tools to fasten components and consider using washers to distribute pressure evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pump impellers and casings, Wear strips and guide rails for conveyor systems, Protective shields and guards in washdown environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||