This robust Nylon Stock Sheet is engineered for demanding plumbing and janitorial environments. Its exceptional durability and impact resistance make it ideal for fabrication and repair of critical components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.394" |
| Length | 41" |
| Width | 45" |
Purpose-built for heavy-duty applications, this Nylon Stock Sheet offers superior strength and wear resistance. With a substantial thickness of 0.394 inches, a generous length of 41 inches, and a width of 45 inches, it provides ample material for custom fabrication. Nylon's inherent properties, including excellent chemical resistance and a low coefficient of friction, ensure reliable performance in demanding industrial settings. This material is well-suited for creating custom shims, wear pads, guards, and replacement parts where robustness is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and accurately cut the Nylon Stock Sheet to the required dimensions using appropriate cutting tools for plastics. 2. Smooth any sharp edges with a deburring tool or fine-grit sandpaper to prevent damage to mating surfaces or personnel. 3. Secure the fabricated nylon component using suitable fasteners, adhesives, or mounting hardware as dictated by the application's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to chipping or melting. | Employ sharp, specialized plastic cutting blades or saws, and maintain consistent feed rates to minimize heat buildup. |
| Over-tightening fasteners, causing stress concentrations and potential cracking of the nylon. | Utilize washers or bushings to distribute load and tighten fasteners to a snug, but not excessive, torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom fabrication of wear pads and bushings, Construction of protective guards and covers, Repair and replacement of structural components in janitorial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||