This robust Nylon Stock Sheet provides exceptional durability and abrasion resistance. Its substantial 0.391-inch thickness ensures long-term performance in rigorous industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.391" |
| Length | 32" |
| Width | 38" |
A proven choice for industrial professionals, this Nylon Stock Sheet measures 0.391 inches thick, 32 inches in length, and 38 inches in width. Engineered from high-grade nylon, it exhibits excellent tensile strength, low friction, and superior resistance to chemicals and impact. This combination of properties makes it ideal for fabricating custom components, wear pads, and structural elements subjected to high mechanical stress and abrasive conditions. Its dimensional stability further enhances its suitability for precision applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cutting lines on the nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saws, routers) for precise fabrication, ensuring safety precautions are observed. 3. Secure fabricated components using suitable fasteners or adhesives designed for nylon, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to poor edge quality and material stress. | Employ carbide-tipped blades or specialized plastic cutting tools for clean, accurate cuts and to minimize heat buildup. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon sheet. | Use washers and torque fasteners to recommended specifications, allowing for slight thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Chute Liners, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||