This robust Nylon stock sheet is engineered for rigorous hydraulic environments. Its substantial 0.391" thickness and durable nylon composition provide exceptional strength and longevity in demanding fluid power applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.391" |
| Length | 20" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 0.391" thick Nylon stock sheet offers exceptional mechanical properties crucial for hydraulic system integrity. With dimensions of 20" x 28", it provides ample material for fabrication of robust components. Nylon's inherent resistance to abrasion, impact, and a wide range of hydraulic fluids makes it an ideal choice for seals, bushings, wear pads, and manifold blocks where reliability under pressure is paramount. Its excellent machinability allows for precise shaping and integration into complex hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition prior to cutting. 2. Machine to precise component specifications using appropriate tooling for nylon. 3. Deburr all edges thoroughly to prevent fluid contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improperly cleaning machined edges leading to particulate contamination. | Thoroughly clean all cut and machined surfaces with a non-residue solvent and lint-free cloths before installation. |
| Over-tightening fasteners during assembly, potentially causing stress fractures in the nylon. | Use torque wrenches and adhere to specified torque values for nylon components to prevent over-compression and damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Plates and Bushings, Manifold Blocks, Pump Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||