This robust Nylon Stock Sheet, measuring 0.390 inches thick, 24 inches in length, and 41 inches in width, is specifically engineered for the rigorous demands of hydraulic systems. Its superior material properties ensure longevity and consistent operation.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.390" |
| Length | 24" |
| Width | 41" |
Engineered for reliability and performance, this Nylon Stock Sheet is manufactured to exacting standards for use in hydraulic components. Its 0.390" thickness provides significant structural integrity, while the 24" x 41" dimensions offer ample material for fabrication. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good impact strength, make it an ideal choice for seals, wear pads, and other critical hydraulic parts subjected to high pressure and constant movement. This material exhibits superior chemical resistance to many hydraulic fluids, ensuring long-term operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or shape the cut pieces according to component design specifications, maintaining tight tolerances. 3. Integrate the fabricated nylon components into the hydraulic system, ensuring proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause delamination or excessive heat build-up. | Utilize sharp, purpose-built tools for nylon (e.g., carbide-tipped blades) and employ cooling methods to prevent thermal degradation. |
| Over-tightening fasteners, leading to stress concentration and potential cracking of the nylon component. | Employ torque-limiting tools and consider the use of larger washers or backing plates to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear rings and seals, Hydraulic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||