This robust Nylon stock sheet, measuring 0.386 inches thick, 37 inches in length, and 25 inches in width, is engineered for superior performance in rigorous pulling and lifting operations.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.386" |
| Length | 37" |
| Width | 25" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits exceptional tensile strength and abrasion resistance, making it ideal for heavy-duty industrial applications. Its 0.386" thickness, combined with a 37" length and 25" width, provides substantial material for custom fabrication of slings, chokers, and protective padding. The inherent properties of nylon offer excellent resistance to moisture and chemicals, ensuring longevity in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the desired dimensions using appropriate industrial cutting tools. 2. Fabricate or integrate the cut material into your pulling or lifting apparatus according to design specifications. 3. Ensure all edges are properly finished and secured to prevent fraying or premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for the load capacity. | Always verify the required load rating and select a Nylon sheet with sufficient thickness and dimensions to meet or exceed these specifications. |
| Inadequate edge finishing leading to fraying. | Properly heat-seal or stitch edges to prevent unraveling and maintain the structural integrity of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Industrial Slings and Hoist Assemblies, Protective Sleeves for Lifting Equipment, Custom Fabrication for Rigging Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||