This robust Nylon Stock Sheet offers exceptional wear resistance and impact strength. Its substantial 0.384" thickness provides superior load-bearing capacity for demanding industrial applications and fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 26" |
| Width | 31" |
Designed for demanding industrial environments, this Nylon Stock Sheet excels due to its inherent toughness, excellent chemical resistance, and low coefficient of friction. Measuring 0.384 inches thick, 26 inches in length, and 31 inches in width, it provides ample material for custom fabrication of wear pads, bushings, gears, and impact plates. The high-density nylon construction ensures longevity under significant mechanical stress and exposure to common industrial lubricants and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of contaminants. 2. Precisely cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the mating surface using industrial-grade fasteners and adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion. | Thoroughly degrease and abrade the substrate surface prior to installation. |
| Using standard cutting tools not designed for polymers, resulting in poor edge quality. | Employ carbide-tipped blades or routers specifically designed for cutting nylon to achieve clean, precise edges. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom fabricated bushings and bearings, Impact absorbing components, Gears and sprockets, Chute liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||