High-performance Nylon stock sheet designed for robust hydraulic applications. Its superior wear resistance and mechanical strength ensure long-term operational integrity and reliability in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.364" |
| Length | 33" |
| Width | 23" |
Engineered for reliability and performance, this Nylon stock sheet measures 0.364 inches in thickness, 33 inches in length, and 23 inches in width. Fabricated from high-grade Nylon, it exhibits exceptional tensile strength, excellent abrasion resistance, and good impact strength, making it ideal for wear pads, bearing surfaces, and custom hydraulic component fabrication. Its inherent lubricity reduces friction, contributing to the efficiency and longevity of hydraulic systems, while its chemical resistance safeguards against common hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard blade for cutting, leading to chipping or uneven edges. | Utilize a carbide-tipped saw blade or a routing bit specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentrations and potential cracking of the Nylon. | Employ washers to distribute the load and tighten fasteners to the manufacturer's recommended torque specifications, avoiding overtightening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Pump and valve components, Sealing elements in hydraulic manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||