This premium Nylon stock sheet, measuring 0.360 inches thick, 40 inches long, and 17 inches wide, is engineered for superior performance in heating and cooling systems. Its robust material properties ensure longevity and efficiency.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.360" |
| Length | 40" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 0.360" thick Nylon stock sheet offers exceptional dimensional stability and consistent performance across a 40" x 17" area. Nylon's inherent strength, excellent abrasion resistance, and good thermal insulation properties make it ideal for demanding heating and cooling environments. It exhibits a high tensile strength and resistance to a broad range of chemicals commonly found in HVAC systems, contributing to extended service life and reduced maintenance requirements. This material is well-suited for fabricating custom components, seals, and structural elements within air handling units, ductwork, and other thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the required dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to achieve precise cuts. 3. Securely fasten or integrate the cut Nylon component into the heating or cooling system as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material stress. | Employ sharp, appropriate cutting tools designed for plastics, such as a band saw or a table saw with a carbide-tipped blade, to ensure clean cuts and prevent material damage. |
| Overheating the Nylon during fabrication, causing degradation or deformation. | Maintain appropriate cutting and machining speeds, and use coolant if necessary, to dissipate heat and prevent thermal damage to the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom HVAC component fabrication, Seals and gaskets for ductwork, Insulating liners for air handlers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||