This robust Nylon stock sheet offers excellent mechanical strength and wear resistance, making it a superior choice for demanding pressure and temperature control systems where reliability is paramount.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.337" |
| Length | 29" |
| Width | 44" |
A high-performance industrial component, this Nylon stock sheet boasts a substantial 0.337-inch thickness, a generous 29-inch width, and a 44-inch length. Engineered from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a broad operational temperature range, ensuring consistent performance in challenging environments. Its inherent lubricity and low coefficient of friction minimize wear on mating components. This material is ideal for fabricating custom seals, gaskets, wear pads, and structural elements within pressure vessels, fluid handling systems, and thermal management assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and deburr all mating surfaces to ensure a precise fit. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the fabricated component using recommended fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or rough edges. | Utilize sharp, specifically designed cutting tools for plastics, such as a fine-tooth saw or a router bit, and maintain a consistent feed rate. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Employ calibrated torque wrenches and follow recommended torque values for Nylon components to prevent excessive clamping pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Seals and Gaskets for High-Pressure Systems, Wear-Resistant Bushings and Bearings in Thermal Environments, Internal Components for Fluid Control Valves and Regulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||