This robust Nylon stock sheet provides exceptional durability and chemical resistance, making it ideal for demanding plumbing and janitorial applications. Its high-strength properties ensure long-term performance in challenging environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.336" |
| Length | 36" |
| Width | 34" |
Trusted by engineers across multiple sectors, this Nylon stock sheet offers a superior combination of mechanical strength and chemical inertness. With dimensions of 0.336 inches thick, 36 inches in length, and 34 inches in width, it meets stringent industrial requirements. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and resistance to a wide range of solvents and caustics, make it an optimal material for custom fabrication of components, seals, gaskets, and protective barriers in plumbing and janitorial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mating surfaces for optimal adhesion or mechanical fastening. 3. Securely install the fabricated component, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ sharp, carbide-tipped blades specifically designed for cutting plastics to ensure clean, burr-free edges. |
| Over-tightening fasteners, leading to stress cracks. | Utilize torque-limiting tools and appropriate washers to distribute load evenly and prevent material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket Fabrication, Protective Liners for Tanks and Chutes, Wear Strips and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||