This robust Nylon stock sheet offers exceptional durability and impact resistance for a wide range of industrial applications. Its high tensile strength and wear resistance ensure long-lasting performance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.328" |
| Length | 35" |
| Width | 24" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.328" thickness, providing superior structural integrity. Measuring 35" in length and 24" in width, it offers ample material for fabrication. Composed of high-grade Nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good chemical resistance, making it suitable for applications requiring consistent performance under stress, such as wear pads, bushings, and custom-machined components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Accurately measure and cut the nylon stock sheet to the desired dimensions using appropriate cutting tools. 3. Secure the cut nylon component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to material deformation or cracking. | Use appropriate torque settings and consider using washers to distribute pressure evenly. |
| Using incompatible adhesives or solvents that can degrade nylon. | Consult material compatibility charts to select adhesives and cleaning agents specifically designed for nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom fabricated machine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||