This robust Nylon stock sheet offers exceptional durability and wear resistance, ideal for fabricating custom hydraulic components and seals. Its precise dimensions ensure consistent performance in demanding fluid power systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.322" |
| Length | 36" |
| Width | 38" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.322 inches, a length of 36 inches, and a width of 38 inches. Composed of high-grade Nylon 6/6, it exhibits superior tensile strength, excellent abrasion resistance, and good impact toughness, making it suitable for dynamic sealing surfaces, wear pads, and structural components in hydraulic systems. Its low coefficient of friction minimizes energy loss and heat generation in moving parts, contributing to overall system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon stock sheet to the required dimensions for your component. 2. Machine the material using standard tooling, ensuring appropriate chip evacuation. 3. For assembled components, apply appropriate adhesives or mechanical fasteners, considering material compatibility.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic machining speeds and feeds for Nylon, leading to melting or poor surface finish. | Utilize slower speeds and higher feed rates specifically recommended for Nylon machining to manage heat and achieve a superior finish. |
| Improperly storing the Nylon sheet, allowing it to absorb moisture and alter dimensional stability. | Store the Nylon sheet in a cool, dry environment, ideally in its original packaging, to prevent moisture absorption and maintain dimensional integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Strips and Bushings, Custom Hydraulic Component Prototypes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||