This high-performance Nylon stock sheet offers superior mechanical strength and thermal resistance, ideal for demanding pressure and temperature control applications where durability is paramount.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.322" |
| Length | 23" |
| Width | 44" |
A high-performance industrial component, this Nylon stock sheet is manufactured to exacting standards, featuring a precise thickness of 0.322 inches, a substantial length of 23 inches, and a width of 44 inches. The inherent properties of Nylon, including excellent abrasion resistance, low coefficient of friction, and good chemical resistance, make it an optimal choice for seals, gaskets, wear pads, and structural components subjected to moderate pressures and temperatures. Its robust nature ensures longevity and reliable performance in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the component using designated hardware, ensuring a proper seal or fit as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard blade for cutting, leading to rough edges and potential material stress. | Employ a sharp, industrial-grade saw blade specifically designed for plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon sheet. | Follow recommended torque specifications for Nylon components, utilizing washers to distribute pressure if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Sealing solutions in fluid power systems, Gaskets for temperature regulation equipment, Wear-resistant components in material handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||