This robust Nylon stock sheet offers superior strength and durability for a wide range of industrial hardware applications. Its exceptional wear resistance and chemical inertness make it ideal for demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.301" |
| Length | 29" |
| Width | 28" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.301 inches, a length of 29 inches, and a width of 28 inches. Composed of high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and low coefficient of friction. Its inherent lubricity and resistance to abrasion make it suitable for components subjected to continuous movement and high loads. The material's good electrical insulation properties and resistance to various chemicals further enhance its versatility in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using designated fasteners or bonding agents suitable for Nylon, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, specialized cutting blades for plastics, such as a carbide-tipped saw blade, and maintain a consistent feed rate to prevent material damage. |
| Over-tightening fasteners, causing stress concentrations and potential cracking of the Nylon sheet. | Employ washers and avoid excessive torque when fastening. Consider using slotted holes to accommodate thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Protective Linings, Custom Machined Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||