This premium Nylon stock sheet is engineered for high-performance hydraulic systems. Its robust construction provides exceptional wear resistance and mechanical strength, ensuring longevity in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.278" |
| Length | 17" |
| Width | 19" |
Manufactured under strict quality controls, this 0.278-inch thick Nylon stock sheet measures 17 inches by 19 inches. Exhibiting excellent tensile strength and a low coefficient of friction, it is ideal for components subjected to abrasion and dynamic loads within hydraulic circuits. Its inherent chemical resistance to oils and hydraulic fluids ensures reliable performance and extended service life, making it a preferred choice for seals, wear pads, and structural elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Install the fabricated component, ensuring proper fitment and sealing within the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to delamination or uneven edges. | Employ sharp, carbide-tipped blades designed for cutting plastics to achieve clean, precise edges. |
| Improperly seating components, causing leaks or premature wear. | Verify that all fabricated Nylon parts conform to design tolerances and are installed with adequate support and alignment. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals, Wear pads and guides, Bushings and bearings in fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||