This premium Nylon stock sheet offers exceptional durability and wear resistance, ideal for fabricating custom components in high-pressure hydraulic systems. Its robust properties ensure long-term reliability.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.270" |
| Length | 30" |
| Width | 34" |
Manufactured under strict quality controls, this 0.270-inch thick Nylon stock sheet measures 30 inches in length and 34 inches in width. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and low coefficient of friction, make it a superior material for seals, wear pads, and custom fittings in hydraulic equipment. Its high impact strength and good chemical resistance further enhance its suitability for demanding environments, ensuring consistent performance and longevity in critical hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for Nylon. 3. Securely fasten the fabricated component within the hydraulic system, verifying proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or chipping. | Utilize sharp, dedicated tools designed for cutting Nylon, such as a fine-tooth saw or router bit. |
| Over-tightening fasteners, which can cause stress concentrations and cracking. | Apply appropriate torque specifications during fastening, avoiding excessive pressure on the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Hydraulic Seals, Wear Strips and Bushings, Protective Guards for Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||