This high-quality Nylon stock sheet is engineered for robust hydraulic systems. Its superior material properties ensure exceptional durability, reduced friction, and excellent wear resistance in demanding operational environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.270" |
| Length | 21" |
| Width | 43" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.270 inches in thickness, 21 inches in width, and 43 inches in length. Nylon's inherent characteristics, including high tensile strength, excellent abrasion resistance, and low coefficient of friction, make it an ideal material for components within hydraulic systems. It effectively withstands impacts and provides reliable performance in sealing, wear pads, and guide elements, reducing system wear and extending service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Ensure all mating surfaces are clean and free from debris before assembly. 3. Securely install the fabricated Nylon component into the hydraulic system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or rough edges. | Employ sharp, high-quality cutting tools designed for plastic machining, such as a router or a CNC mill, with appropriate feed rates and speeds. |
| Over-tightening fasteners, which can cause the Nylon to deform or crack. | Use washers to distribute load and tighten fasteners to the manufacturer's recommended torque specifications for Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wear rings, Guide bushings and bearings, Valve components and seat inserts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||