This high-density Nylon stock sheet offers exceptional durability and chemical resistance, making it ideal for demanding plumbing and janitorial environments. Engineered for longevity and performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.262" |
| Length | 22" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 0.262-inch thick Nylon stock sheet measures 22 inches in width and 34 inches in length. Exhibiting superior abrasion resistance, excellent tensile strength, and broad chemical compatibility, this material is well-suited for fabricating custom components in corrosive or high-wear plumbing and janitorial systems. Its low coefficient of friction aids in smooth operation of moving parts, while its inherent toughness ensures resilience against impact and operational stresses. Machinable to precise dimensions, it allows for custom gasket, seal, or protective component creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools for nylon. 2. Machine or form the cut material to the final component shape. 3. Install the fabricated component into the target plumbing or janitorial system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to melting or rough edges. | Utilize sharp, carbide-tipped blades designed for cutting plastics, ensuring proper feed rates and cooling to prevent material degradation. |
| Over-tightening fasteners when installing fabricated components, potentially cracking the nylon. | Apply appropriate torque settings for nylon components, using washers to distribute load and prevent localized stress concentration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom seals and gaskets for pipe fittings, Wear pads for janitorial equipment, Protective liners for tanks and chutes, DIY component fabrication for plumbing repairs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||