High-performance Nylon stock sheet engineered for robust industrial use. Offers superior strength, wear resistance, and impact absorption, ideal for custom fabrication and critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.247" |
| Length | 35" |
| Width | 38" |
Designed for demanding industrial environments, this Nylon stock sheet provides exceptional mechanical properties including high tensile strength, excellent abrasion resistance, and superior impact toughness. Its 0.247-inch thickness, combined with dimensions of 35 inches in length and 38 inches in width, makes it suitable for fabricating durable wear pads, bushings, guides, and structural components. The inherent lubricity of Nylon further reduces friction in moving parts. This material is resistant to chemicals and moisture, ensuring longevity in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cutouts on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, laser cutter) for precise fabrication. 3. Secure the fabricated component using standard fastening methods suitable for Nylon, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without considering Nylon's properties, leading to melting or chipping. | Employ sharp, high-speed cutting tools with appropriate cooling to prevent excessive heat buildup and ensure clean cuts. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Use washers to distribute the load and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Pads, Bushings and Bearings, Gears and Sprockets, Custom Machine Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||