This robust Nylon stock sheet offers exceptional durability and wear resistance, ideal for applications requiring precise pressure and temperature control. Engineered for reliability in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.244" |
| Length | 22" |
| Width | 33" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.244 inches thick, 22 inches in length, and 33 inches in width. Composed of high-grade Nylon, it exhibits excellent mechanical strength, good abrasion resistance, and a wide operating temperature range suitable for pressure and temperature control systems. Its inherent lubricity reduces friction, making it an optimal choice for seals, gaskets, and wear components in hydraulic and pneumatic systems where consistent performance is paramount. The material's low moisture absorption further enhances its stability in varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut component according to system design specifications, ensuring proper sealing and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly cut components, leading to leaks or premature wear. | Always measure and cut to exact specifications, verifying dimensions before installation. |
| Over-tightening fasteners, which can cause deformation or cracking of the Nylon sheet. | Apply torque within the recommended range for the specific application and hardware. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic and pneumatic system seals, Pump and valve components, Wear pads and guides in control mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||