This robust Nylon stock sheet is engineered for demanding hydraulic systems. Its durable material and precise dimensions ensure reliable performance in high-stress environments, offering excellent wear resistance and chemical inertness.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.231" |
| Length | 17" |
| Width | 27" |
A high-performance industrial component, this Nylon stock sheet measures 0.231 inches in thickness, 17 inches in length, and 27 inches in width. Manufactured from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for hydraulic seals, bearings, wear pads, and custom component fabrication. Its excellent chemical resistance ensures longevity when exposed to hydraulic fluids and common industrial solvents, preventing degradation and maintaining structural integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten or integrate the fabricated component into the hydraulic system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for nylon, leading to melting or uneven edges. | Utilize sharp, carbide-tipped blades specifically designed for plastics or nylon to achieve clean, precise cuts without excessive heat buildup. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the nylon component. | Apply torque specifications appropriate for nylon, ensuring fasteners are snug but not excessively tight. Consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Bushings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||