Engineered from high-performance nylon, this stock sheet offers exceptional durability and thermal insulation. Its robust construction makes it ideal for challenging heating and cooling environments, ensuring reliable performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.226" |
| Length | 33" |
| Width | 39" |
Purpose-built for heavy-duty applications, this Nylon stock sheet boasts superior impact strength and excellent thermal insulation properties, crucial for energy efficiency in heating and cooling systems. With dimensions of 0.226" thickness, 33" width, and 39" length, it provides a substantial material platform. Nylon's inherent chemical resistance and low friction coefficient further enhance its suitability for demanding industrial HVAC components, ductwork liners, and insulation barriers where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean and free of debris. 2. Cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet to the application surface using industrial-grade adhesives or mechanical fasteners suitable for nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ sharp, carbide-tipped blades specifically designed for cutting nylon or similar polymers to prevent chipping or melting. |
| Over-tightening mechanical fasteners, leading to stress concentration and potential cracking. | Use washers with mechanical fasteners to distribute load and tighten them only until snug, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Duct Liners, Thermal Insulation Barriers, Industrial Fan Housing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||