This robust Nylon stock sheet is engineered for demanding hydraulic environments. Its superior material properties provide exceptional durability, wear resistance, and a cost-effective solution for custom component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.208" |
| Length | 30" |
| Width | 19" |
Purpose-built for heavy-duty applications, this 0.208-inch thick Nylon stock sheet offers excellent dimensional stability and a high strength-to-weight ratio, making it ideal for hydraulic components. Its inherent lubricity reduces friction, minimizing wear in dynamic systems. The material exhibits good chemical resistance to common hydraulic fluids and solvents. With dimensions of 19 inches by 30 inches, it provides ample material for machining seals, wear pads, bushings, and other critical parts within hydraulic systems, ensuring reliable performance under pressure and extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required component dimensions on the Nylon stock sheet. 2. Utilize appropriate machining techniques (e.g., milling, turning, sawing) to fabricate the component, ensuring precise tolerances. 3. Inspect the finished component for any defects or deviations from specifications before installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, leading to material degradation and reduced performance. | Employ proper cooling methods, such as flood coolant or air blast, and maintain appropriate cutting speeds and feed rates to prevent excessive heat buildup. |
| Incorrectly selecting tool geometry or material for cutting Nylon, resulting in poor surface finish or tool wear. | Use sharp, high-speed steel or carbide tooling with appropriate rake and clearance angles designed for machining plastics to achieve optimal results. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Seals and gaskets, Bushings and bearings, Custom hydraulic component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||