This high-performance Nylon stock sheet, engineered for demanding pressure and temperature control applications, offers exceptional durability and resistance. Its robust material properties ensure reliable operation in critical systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.208" |
| Length | 27" |
| Width | 22" |
Specified by design engineers worldwide, this 0.208" thick Nylon stock sheet (27" length x 22" width) is a premium material for applications requiring excellent mechanical strength, abrasion resistance, and thermal stability. Its inherent dielectric properties and low coefficient of friction make it ideal for components exposed to moderate pressures and temperatures, including seals, gaskets, wear pads, and insulators in fluid handling systems, mechanical assemblies, and electrical enclosures. Compliance with industry standards for material purity and performance is assured.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut sheet to the substrate using approved mechanical fasteners or adhesives, ensuring proper alignment and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate cutting tools, leading to chipping or delamination. | Utilize sharp, carbide-tipped blades or laser cutting for precise, clean cuts without material damage. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Employ appropriate torque settings and consider using washers to distribute load evenly, preventing localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Seals and Gaskets in Fluid Power Systems, Wear Strips and Bushings in Conveyor Systems, Insulating Components in Electrical Panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||